..:: Home > Departments > Conservation District > Erosion & Sediment Pollution Control Plan ::..

Erosion & Sediment Pollution Control Plan

An erosion and sediment pollution control plan is a site specific plan identifying best management practices or ways in which accelerated erosion and sediment pollution will be minimized. The erosion and sediment pollution control plan should be developed by an individual who has been trained or has experience in erosion and sediment control methods and techniques. A plan typically includes a plan narrative and plan drawings. The plan should be developed prior to any earth disturbance activities at the site.

At a minimum, the plan should contain the following information:

  • Identification of existing topographic features at the site and immediate surrounding area. Includes a location map identifying the site location.
  • Soils information including the soil types, depths, slopes, locations, characteristics, and limitations of the soils present at the site.
  • Characteristics of the earth disturbance activity including the past, present and proposed land uses, as well as, a description of the proposed alteration to the project site.
  • The amount of runoff from the project and the upstream watershed area.
  • Location of Waters of the Commonwealth which may receive discharges from the project. The Chapter 93 and/or Existing Use water quality classification of the receiving waters should also be identified.
  • The type of perimeter and on-site best management practices that will be used to minimize soil erosion and sediment pollution should be identified.
  • A sequence of construction identifying the installation of erosion and sediment pollution control devices and facilities, schedule of earth disturbance activities, temporary and permanent stabilization, and removal of temporary erosion and sediment pollution control devices upon final stabilization.
  • Supporting calculations.
  • Plan drawings depicting existing and proposed site features, slope of land, Waters of the Commonwealth, locations of erosion and sediment control devices and facilities, existing and proposed stormwater conveyance systems and other necessary information.
  • A maintenance plan which provides for inspection of erosion and sediment pollution control devices and facilities on a weekly basis and following precipitation events, as well as, maintenance, replacement or repairs to inadequate or damaged controls and devices to ensure effective and efficient operation.
  • Procedures which identify proper measures for recycling and disposal of construction wastes from the project site.

The erosion and sediment pollution control plan should be kept at the site throughout the duration of the earthmoving activities. Inspectors from the County Conservation District and/or PA Department of Environmental Protection (DEP) may visit the site and request to see the plan.


Review and Approval of Erosion & Sediment Pollution Control Plans

Regulations may require plan review and approval from the Clinton County Conservation District prior to any earth disturbance activities at the site. Several Clinton County municipalities (Townships, City and Boroughs) require erosion and sediment pollution control plan review and approval before building permits or similar municipal permits will be granted. The PA Department of Environmental Protection also requires erosion and sediment pollution control plan review and approval before other permits will be issued.

The Clinton County Conservation District has an erosion and sediment pollution control plan review fee schedule. The fees are based on category of earthmoving and extent of earth disturbance. You may download the fee schedule from this website with the link below. Please note that residential subdivisions fall under the industrial/commercial fee schedule.


Forms